ET-6052D

8-Channel Digital Output and 4-Channel Digital Input Web Based I/O Module.
In stock
SKU
ET-6052D
$509.00
The ET-6000 series also supports various Modbus functions. For example, Modbus/TCP slave, Modbus/TCP to Modbus/RTU gateway, Modbus/RTU master, Modbus/RTU slave; meaning the ET-6000 series can easily be integrated into any SCADA software environment using the Modbus protocol. The ET-6000 series modules are designed to be used in Industrial monitoring and measurement applications. The hardware has been manufactured to survive in harsh and noisy environments. The module contains 3-way isolation against noise and surge signals, has a wide range of power input (+10 ~ +30VDC) and can operating at temperature ranging from -25C ~ +75C. Access your ET-6000 module over the internet
  • Built in Web Server Each ET-6000 module has a built - in web server that allows the users to easily configure, monitor and control the module from a remote location using a regular web browser
  • Web HMI The Web HMI function allows users to create attractive, dynamic web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif formats) and define a description for each I/O point. No HTML or Java skills are needed to create the web pages.
  • Communication Security An Account and password is needed when logging into the ET-6000 web server. An IP address filter is included; which can be used to allow or deny connections from specific IP addresses
  • Modbus protocol The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA software. The Modbus/RTU slave function on the RS-232 port can be used to connect to a local HMI. The Modbus /TCP to Modbus/RTU gateway function through the Ethernet port to the RS-232 port can be used to upgrade a serial device with Ethernet communication abilit.
  • Built-in Multi-function I/O An LED indicator is used for each DI or DO channel All Digital Output modules provide : Power on value (On boot up, the DO status is set to the Power-on value) Safe value (If Modbus/TCP communication is lost for a specified period,the DO status is set to the safe value) All Digital Input modules provide : High/Low latched status DI channels can also be used as DI status and 16-bit low speed (100Hz) counters.
  • All-in-one module The various I/O components are mixed with multiple channels in a single module Provides the most cost effective I/O usage and enhances performance of the I/O operations
  • 3-way isolated noise/surge protection Protect the hardware from damage caused by noise and surges Designed with isolation circuits for Ethernet, I/O and Power
  • Portable Configuration All configuration settings can be saved to the EEPROM on the ET6000 EEPROM is mounted on a daughter board (called the ƒ??portable* board) The settings can stored and easily backed up and moved.
  • Built-in Dual Watchdog Dual Watchdog consists of a Module Watchdog and a Host Watchdog. Module Watchdog is a built-in hardware circuit Can be used to monitor the operation of the module Will reset the CPU module if a failure occurs in either the hardware or the software. Host Watchdog is a software function Can be used to monitor the operating status of the host Is used to prevent network communication problems or host failures
  • Automatic MDI / MDI-X crossover for plug-and-play RJ-45 port supports automatic MDI/MDI-x that can automatically detect the type of connection to the Ethernet device without requiring special straight or crossover cables
  • Ventilated housing designed to operate between -25°C and +75°C The ET-6000 is housed in a plastic-based shell/case with a column-like ventilator that helps to cool the working environment inside the shell/case Allows the ET-6000 to operate at temperatures ranging from -25°C and +75°C.
  • I/O pair connection This function is used to create a DI to DO pair through the Ethernet. Once the configuration is complete, the ET-6000 module can poll the status of local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background
Specifications:
  • CPU: 80186 , 80MHz
  • SRAM: 512 KB
  • Flash Memory: 512 KB
  • EEPROM: 16 KB
  • Dual Watchdog: Yes
  • Serial Port: RS-232 (TXD, RXD, GND) (115200 bps Max.)
  • Ethernet Port: 10 / 100 Base TX (With Link, Activity LED Indicator)
  • 7 Segment LED Display: 5 Digits
  • System LED Indicator: 4
  • Push Button: 4
  • Output Channels: 8 (Source)
  • LED Indicator: Yes
  • Output Type: Isolated (N-MOSFET, Open Source)
  • Max Load Current: 1.4A/ channel
  • Load Operating Voltage: 10VDC to 40VDC
  • External Power Voltage Range: 12VDC to 45VDC
  • Over-Voltage Protection: +48 VDC
  • Direct Drive Power Relay Module: Yes
  • Short Circuit Protection and Current Limitation: Yes
  • Switching Inductive Loads: Yes
  • Intra-module Isolation, Field to Logic: 3750V rms
  • Input Channels: 14 (Sink/Source)
  • LED Indicator: Yes
  • Input Type: Isolation, One Common/Ground for All Digital Inputs
  • Input Impedance: 10K Ohms, 0.5W (For Wet Contact)
  • Dry Contact (Source): On Voltage Level : Close to GND Off Voltage Level : Open
  • Wet Contact (Sink/Source): On Voltage Level : +10 to 50Vdc Off Voltage Level : +3V (Max.)
  • Each Channel Can Be To Dry Contact or Wet
  • Contact: Yes
  • Counters Channels : 14
  • Max. Input Frequency : 100Hz
  • Min. Pulse Width : 5ms
  • Intra-module Isolation, Field to Logic: 3750V rms
  • 3 Way Isolation - Ethernet: 1500V rms
  • 3 Way Isolation - I/O: 3750V rms
  • 3 Way Isolation - Power: 1000 VDC
  • Din Rail Mount: Yes
  • Wall Mount: Yes
  • Power Input: +10 to +30 VDC
  • Power Consumption: 3.0W
  • Operating Temperature: -25°C ~ +75°C
  • Storage Temperature: -30°C ~ +75°C
  • Relative Humidity: 10% to 95% Non-condensing
  • Certifications: CE, FCC
  • Dimensions: 90mm x 111mm x 70mm (W x D x H)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account